Material Handling Equipment
SS Platform Trolley
SS 304 / 316
Stainless steel grade
Custom
Fabrication to spec
Material Handling
Category
About This Product
Product Overview
Platform trolleys are the most common trolleys which are used in almost every industry for material and goods moving/ handling purpose. Our platform trollies are available in various specifications to cater to the requirement of clients.
Neelansh equipment & machines are supplying stainless steel and mild steel powder coated platform trollies to pharmaceutical, biotech, hospitals, tyre manufacturing units, food processing industries etc. which are designed to withstand high pressure and compression.
Guide
What is a platform trolley and how does it work?
A platform trolley, also called a flatbed trolley or platform truck, is a flat deck on four castor wheels with a push handle, used to move cartons, bags, drums, containers and parts around a plant by hand. It takes the weight of the load off the operator: instead of lifting and carrying, the operator only has to push, steer and stop.
How easily it does that depends on the wheels and how they are arranged. A common layout puts two swivel castors at the handle end, which steer, and two fixed castors at the far end, which keep the trolley running straight down long corridors. Brakes on the swivel castors hold the trolley still while it is loaded. The wheel material decides how the trolley behaves on your floor: polyurethane rolls quietly without marking epoxy or vinyl, rubber is the softest and quietest, and nylon is hard and rolls easily under heavy loads on smooth concrete but can mark softer floors.
Our platform trolleys are fabricated in SS 304 or SS 316, or in mild steel with a powder-coated finish where stainless steel is not needed. The deck, handles and rails are sized to the loads you move and to the doors, lifts and corridors the trolley has to pass through.
Types
Platform trolley types we manufacture
Single-handle platform trolley
A flat deck with one push handle. The most common type, used for general material movement across a plant.
Double-handle platform trolley
Handles at both ends, so the trolley can be pushed from either side in narrow aisles where it cannot be turned round.
Trolley with side rails
Rails around the deck keep cartons, bags and parts from sliding off when the trolley turns or crosses a threshold.
Box-type trolley with lid
A closed stainless steel box on castors with a hinged lid, for material that must stay covered while it moves.
Applications
Where platform trolleys are used
Pharmaceutical plants
Moving raw materials, packing materials and finished goods between stores, production and dispatch.
Biotech facilities
Carrying media, consumables and equipment between labs, stores and production suites.
Hospitals
Moving supplies, linen and stores between departments, lifts and wards.
Food processing
Carrying ingredients, trays and packed goods through hygienic processing and packing areas.
Tyre and engineering units
Moving components and parts between machines, assembly lines and stores.
Stores and warehouses
Picking, staging and moving cartons and bags between racks, loading bays and the shop floor.
Buying guide
How to choose the right platform trolley
Load
Tell us the heaviest load and whether it is spread across the deck or concentrated in one place. This sets the deck, frame and castor rating.
Deck size
Large enough for your biggest carton or container, but small enough to pass through doors, lifts and airlocks. Deck size, handle height and rail layout made to suit your loads and the spaces the trolley works in.
Wheel material
Polyurethane for cleanroom and epoxy floors, rubber where quiet running matters, nylon for heavy loads on smooth concrete.
Castor layout and brakes
Two swivel and two fixed castors track straight on long runs; four swivel castors turn in tighter spaces. Brakes hold the trolley while loading.
Material
SS 304 for most clean and wet areas, SS 316 where strong chemicals or disinfectants are used, powder-coated MS for dry stores. SS 304 or SS 316 for cleanrooms, hospitals and wet areas; mild steel with powder coating for stores and general industry.
Handles, rails or box
One handle, two handles, side rails or a lidded box, depending on what you carry and how it must be protected.
How we work
From enquiry to installation
Every platform trolley is built to order through the same six stages, so it fits your site and the way you work.
- 01
Planning: the loads you move and the route they take through your site
- 02
Evaluation: deck size, wheels, castor layout and material grade
- 03
Inspection: door widths, lifts, ramps and floor finish at your site
- 04
Design: drawings shared for your approval before fabrication
- 05
Manufacturing: fabricated in-house at our Pune factory
- 06
Installation: delivered to your site and handed over ready to use
Supply across India
Platform trolley manufacturer in Pune, supplying across India
Neelansh Equipments & Machines manufactures stainless steel and powder-coated MS platform trolleys in-house at our factory in Hadapsar, Pune, and supplies them across India, including Mumbai, Hyderabad, Chennai, Bangalore and Ahmedabad. Each trolley is built to the load, deck size and wheels you specify.
Platform trolleys are usually part of a wider set of material handling equipment: SS multi-purpose trolleys for shelved loads, SS drum trolleys for drums and containers and hydraulic pallet trucks for palletised goods. Tell us what you move and how much, and send us your requirement for a quotation.
Product Details
Specifications
| Material | 304/316 grade stainless steel |
|---|---|
| Finish | Matt/Mirror |
- Also available in ms powder coated
- Available in PU, rubber, nylon, castor wheels
- Easy handling and long lasting
Questions
F.A.Q.
Do you supply platform trolleys outside Pune?
Yes. We manufacture in Pune and supply platform trolleys across India, including Mumbai, Hyderabad, Chennai, Bangalore and Ahmedabad. Share your sizes and quantities and we will send a quotation.
Which wheels are best for a platform trolley?
Polyurethane wheels suit most cleanroom, epoxy and tiled floors because they roll quietly and do not mark the floor. Rubber wheels are softer and quieter, and nylon wheels roll easily under heavy loads on smooth concrete. We fit PU, rubber or nylon wheels to suit your floor and load.
Can you make a platform trolley to our size?
Yes. Deck size, handle height and the choice of side rails, double handles or a lidded box are all made to order. Tell us the largest load you move and the narrowest door or lift it has to pass through.
Our Products
Related Material Handling Equipment
Explore more material handling equipment solutions from the same range.
Need a Custom Solution?
Need a custom SS Platform Trolley or a specific configuration? Our team will help you find the right solution.
- Custom Fabrication
- SS 304 / 316 Quality
- Manufacturer & Exporter
Get In Touch
Enquire About This Product
Have a project in mind? Send us your details and we'll get back to you soon.
Call Us
Email Us
Visit Us
A-302, Binawat Majestic, Sasane Nagar Road, Hadapsar, Haveli, Pune-411028, Maharashtra, India