Cleanroom Equipments
Infrared Dryer
SS 304 / 316
Stainless steel grade
Custom
Fabrication to spec
Cleanroom
Category
About This Product
Product Overview
Neelansh equipment & machines is a salient manufacturer, supplier & exporter of stainless steel IR Dryer. IR dryers are used in pharmaceutical and food processing industry for heating solution to dry the containers, IPC bins etc.
Guide
What is an infrared dryer and how does it work?
An infrared (IR) dryer uses infrared heaters to dry surfaces that have just been washed. In pharmaceutical and food plants it is used to dry containers, IPC (in-process container) bins and similar vessels after cleaning, so they are dry before they go back into use.
Infrared heating works by radiation rather than by heating the air. The heater gives off infrared energy, and the surfaces it reaches absorb that energy and warm up directly. Water absorbs infrared strongly, so the moisture left on a washed surface heats up and evaporates. Because the energy goes into the surface rather than into the room, the area around the dryer stays close to normal temperature, and drying does not depend on hot air circulating around the container.
We make two designs. The umbrella type has a wide, umbrella-shaped hood that sits over an open container or bin and directs heat down onto it; we have built umbrellas up to 1,500 mm in diameter. The insertion type has a heater that is lowered into the container to dry it from the inside. Both are mounted on a mobile stand with castor wheels, so one dryer can serve several containers, and we install them at your site.
Types
Infrared dryer types we manufacture
Umbrella type IR dryer
A wide hood over the open top of a container or bin directs infrared heat onto it. Built with umbrellas up to 1,500 mm in diameter.
Insertion type IR dryer
A heater that is lowered into the container dries it from the inside, suited to deep containers and bins.
Applications
Where IR dryers are used
IPC bins
Drying in-process container bins after washing in tablet and capsule manufacturing.
Containers and vessels
Drying storage containers and open vessels before they are reused or stored.
Bowls and change parts
Drying equipment bowls and machine change parts after cleaning.
Sieves and scoops
Drying small parts such as sieves and scoops that are washed between batches.
Food processing
Drying washed containers and utensils in hygienic food production areas.
Wash areas
Drying containers right after washing, so they leave the wash bay ready to use.
Buying guide
How to choose the right IR dryer
Umbrella or insertion
Umbrella type for open, wide containers and bins; insertion type to dry deep containers from the inside.
Container size and opening
Tell us the diameter, depth and opening of the largest container you dry, so the umbrella or heater fits it. Umbrella diameter, heater size and stand height made to suit the containers and bins you dry.
Material and heat
Tell us what the container is made of and whether it has gaskets or plastic parts, so the drying heat suits it.
One dryer or several
A mobile stand lets one dryer serve several containers; busy wash areas may need more than one. Mounted on a stand with castor wheels, so one dryer can be moved between containers and wash bays.
Site and installation
Share the wash area layout and power supply; we install our IR dryers at your site. We install our IR dryers at your site and hand them over working at your wash area.
Stainless steel build
Stainless steel construction suits wet wash areas and is easy to clean. The stand and hood are stainless steel, which suits wet wash areas and is easy to wipe clean.
How we work
From enquiry to installation
Every IR dryer is built to order through the same six stages, so it fits your site and the way you work.
- 01
Planning: the containers you dry and your washing routine
- 02
Evaluation: dryer type, size, heating and stand height
- 03
Inspection: wash area layout, power supply and floor at your site
- 04
Design: drawings shared for your approval before fabrication
- 05
Manufacturing: fabricated in-house at our Pune factory
- 06
Installation: delivered, installed and commissioned at your site
Supply across India
IR dryer manufacturer in Pune, supplying across India
Neelansh Equipments & Machines manufactures umbrella and insertion type infrared dryers in-house at our factory in Hadapsar, Pune, and supplies and installs them across India, including Mumbai, Hyderabad, Chennai, Bangalore and Ahmedabad.
IR dryers are part of our cleanroom equipment range and are used with the containers and parts we also make, such as SS containers, sieves and SS multi-purpose trolleys for moving them between washing and storage. Tell us the size of your containers and how many you dry per shift, and send us your requirement for a quotation. Tell us the opening and depth of your largest container, so we size the hood or heater to suit it.
Product Details
Specifications
- Well engineered and specific design.
- Also used for outdoor applications.
- Hassle free installation and easy maintenance.
- Longer functional and service life.
- Having good durability and long lasting.
Questions
F.A.Q.
How much dia of umbrella we can get into Umbrella type IR Dryer?
We have provided up to 1500mm dia of umbrella type IR Dryer.
Do you offer installation services?
Yes, we are providing installation services for our own equipment.
Do you supply and install IR dryers outside Pune?
Yes. We manufacture in Pune and supply and install IR dryers across India, including Mumbai, Hyderabad, Chennai, Bangalore and Ahmedabad. Share your container sizes and we will send a quotation.
What is the difference between umbrella and insertion type IR dryers?
An umbrella type dryer has a wide hood that sits over an open container and directs heat down onto it. An insertion type dryer has a heater that is lowered into the container to dry it from the inside. Umbrella types suit wide, open containers; insertion types suit deeper ones.
What can an IR dryer be used to dry?
It dries washed IPC bins, containers and vessels, and parts such as bowls, sieves and scoops, so they are dry before they go back into use or into storage.
Our Products
Related Cleanroom Equipments
Explore more cleanroom equipments solutions from the same range.
Need a Custom Solution?
Need a custom Infrared Dryer or a specific configuration? Our team will help you find the right solution.
- Custom Fabrication
- SS 304 / 316 Quality
- Manufacturer & Exporter
Get In Touch
Enquire About This Product
Have a project in mind? Send us your details and we'll get back to you soon.
Call Us
Email Us
Visit Us
A-302, Binawat Majestic, Sasane Nagar Road, Hadapsar, Haveli, Pune-411028, Maharashtra, India